EL150 light diffuser can be added into PC, PS, PMMA to receive good diffusion effect and at the same to have high transmittance; Compare to other polymer based organic diffuser like PMMA, EL201 silicone resin based diffuser can be 3-4 times higher efficiency, This means with low dosage to receive same effect. And silicone resin’s thermal stability is much higher than others like PMMA、PS、PP、PE eth.
TYPICAL PROPERTIES
These values are not intended for use in preparing specifications, Please contact us prior to writing specifications on this product.
TEST Unit Value
Appearance Fine white particle
Mean particle diameter um 1.5
Moisture content Wt % < 0.5
True specific gravity (25°C) g/cm3 1.32
Bulk specific gravity (25°C) g/cm3 0.35
PH value 7.0
Refractive index 1.41-1.45
APPLICATION
Add into PC、PS、PMMA as LED light diffuser
Add into or coat on the PET to produce light diffusion film
FEATURES
Sharp particle size distribution
Thermal stability
Super haze effective - very low dosage to receive enough haze
BENEFITS
Low dosage to receive high efficiency
High transmittance with good diffusion
Direct add/no need via master batch
COMPOSITION
100% Silicone resin
PACKAGE
25kg cardboard drum
HANDLING PRECAUTIONS
Wear eye protection, protective gloves and mask at all times when working with this product.
Maintain adequate ventilation in the work area at all times.
STORAGE
When stored below 35°C (122°F), EL201 has a shelf life of 36 months from manufacture.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
