DESCRIPTION 

 Polyurethane modified silicone microsphere TP902U can be added into paint and inks to provide a smooth, soft and suede touch with good wear and scratch resistance properties. For water-based system, we offer pre-dispersed product TP902U-40 which is much easier to use. With the same diameter – 2.0μm and all modified by PU, TP902U is harder than TP502U and TP302U but more slippery.  

FEATURES 

 • Provide a special soft and suede touch. 

 • Improve abrasion and scratch resistance. 

 • Anti-aging. 

 • Less moisture absorption. 

 • Less yellowing Vs pure PU powder 

 • Less swelling Vs pure PU powder 

 • Much more thermal stability than pure PU powder 

ADVANTAGES 

 • High silicone content, offering better heat resistance and anti-aging property. • Polyurethane modified surface significantly improves the compatibility with other resins. 

COMPOSITION 

 • Polyurethane modified silicone elastomer 

PACKAGE 

 Typical packaging is 10kg carton, lined with a plastic bag. Samples are packaged in 100g plastic bag. 

HANDLING PRECAUTIONS 

 • Wear eye protection, protective gloves and mask always when working with this product. 

 • Always maintain adequate ventilation in the work area. 

 STORAGE 

 When stored below 35°C (122°F), TP902U series products has a shelf life of 12 months from manufacture. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

APPLICATION 

 • Added into paints and inks to provide a smooth, soft and suede touch. 

 • Added into TPU, TPE and TPV to offer a smooth suede touch. 

HOW TO USE 

 • Dosage: depending on different requirements for touch, surface gloss, etc., the dosage of TP902U in paints and inks is 1.0 – 10.0%. 

 • Dispersion disc, three - roll mill and sand mill can facilitate the dispersion of TP902U in the formulation, but ultrasonic dispersion is much more effective.