DESCRIPTION 

 Polyurethane modified silicone microsphere TP906U can be added into paint and inks to provide a smooth, soft and suede touch with good wear and scratch resistance properties. For water-based system, we offer pre-dispersed product TP906U-40 which is much easier to use. With the similar diameter - 6.0μm and all modified by PU, TP906U is harder than TP506U and TP305U but more slippery.

FEATURES 

 • Provide a special soft and suede touch.

 • Improve abrasion and scratch resistance.

 • Anti-aging. 

 • Less moisture absorption. 

 • Less yellowing Vs pure PU powder 

 • Less swelling Vs pure PU powder 

 • Much more thermal stability than pure PU powder 

 ADVANTAGES 

 • High silicone content, offering better heat resistance and anti-aging property. 

 • Polyurethane modified surface significantly improves the compatibility with other resins. 

 COMPOSITION 

 • Polyurethane modified silicone elastomer 

 PACKAGE 

 Typical packaging is 10kg carton, lined with a plastic bag. Samples are packaged in 100g plastic bag. 

 HANDLING PRECAUTIONS 

 • Wear eye protection, protective gloves and mask always when working with this product. 

 • Always maintain adequate ventilation in the work area. 

 STORAGE 

 When stored below 35°C (122°F), TP906U series products has a shelf life of 12 months from manufacture. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

APPLICATION 

 • Added into paints and inks to provide a smooth, soft and suede touch. 

 • Added into TPU, TPE and TPV to offer a smooth suede touch.

HOW TO USE

 • Dosage: depending on different requirements for touch, surface gloss, etc., the dosage of TP906U in paints and inks is 1.0 – 10.0%.

 • Dispersion disc, three - roll mill and sand mill can facilitate the dispersion of TP906U in the formulation, but ultrasonic dispersion is much more effective.